XPEECH 2S Operation Manual page 79

S I P Operation Manual
Filling in the CPT Table
Fill in the table after the detection is completed as below, where the values are the frequency and
On-and-Off ratio detected. Please click the
extension line, please do not set the detected busy tone of the PBX and the PSTN in the same set,
otherwise the value detected the first time will be overwritten.
Save Settings
Tick the check box to save the new parameters and restart the gateway after the test is completed.
Then click the
Accept
ended.
button. The gateway will use the new parameter to detect whether a call has
button. If connecting gateway to a PBX
Accept
75