Using The Strap - Olimpus IPLEX RT Operation Manual

Using the strap

1. While pressing the shoulder strap hook lever, attach
the hook to a main unit strap ring or the strap bracket.
Two strap rings are provided for attaching the strap
when transporting the main unit. Attach the strap to
the two strap brackets and to one of the strap rings to
do observations.
2. During observation, attach the shoulder strap
so that the side with the two connections is
on the left side of the main unit, as shown
in the figure right. The two connections can
also be attached to the right side of the main
unit. However, this will be unbalanced and
operation may be difficult when the control
unit is attached to the side of the main unit.
3. Use the shoulder strap to hang the IPLEX RX/RT (main unit)
from your shoulder.
Strap ring
Not attached
For transport
For transport
- 4 -
Strap bracket
For observation
For observation