Playing Discs; Basic Playback Controls; Operations For Video Playback; Using The Disc Menu - Philips DVP3040K User Manual

Disc Operations

Playing discs

1
Connect the power cords of the DVD
player and TV (and any optional stereo or
AV receiver) to a power outlet.
2
Turn on the TV power and set to the
correct Video In channel. (See page 15
"Setting up the TV").
3
Press STANDBY-ON to turn on the
DVD player.
➜
The DVD background screen appears
on the TV.
4
Press OPEN/CLOSE 0 on the front of
the DVD player.
G
You can also hold down the STOP Ç
button on the remote control to open
and close the disc tray.
5
Place a disc into the disc tray with the lable
facing up, then press OPEN/CLOSE 0.
➜
For double-sided discs, load the side
you want to play facing up.
6
Playback may start automatically. If not
press PLAY/PAUSE 2; .
➜
If a disc menu appears on the TV, see
page 20 "Using the Disc Menu".
➜
If the disc is locked by parental control,
you must enter your six-digit password.
(See page 33).
G
For more playback features, see pages 20–25.

Basic playback controls

Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
1
During playback, press PLAY/PAUSE 2;
to pause playback and display a still
picture.
➜
Sound will be muted.
2
To resume normal playback, press
PLAY/PAUSE 2; again.
The operating features described here might not be possible for certain discs. Always refer
TIPS:
to the instructions supplied with the discs.
20
01-41_DVP3040K_93_engRC3
Selecting track/chapter
G
Press PREV
previous or next track/chapter.
G
In STOP mode, press DISPLAY to
display the disc information text line for
title/chapter/track (example - 00/08).
G
Use alphanumeric keypad (0-9) to
enter valid title/chapter/track number,
then press OK.
➜
The playback skips to the selected title/
chapter/track.
Stopping playback
G
Press STOP Ç.
Helpful hints:
– Screen saver will start automatically if the
disc playback is stopped/paused for 5 minutes.
– The player will automatically switch to
Power Standby mode if you do not press any
buttons for 15 minutes after the disc has
stopped playing.

Operations for video playback

(DVD/VCD/SVCD)

Using the Disc Menu

Depending on the disc, a menu may
appear on the TV screen once you load in
the disc.
To select a playback feature or item
G
Use 1 2 3 4 keys or numeric keypad
(0-9) on the remote, then press OK to
start playback.
To access or remove the menu
G
Press DISC MENU on the remote.
20
/ NEXT to go to the
J K
02/06/06, 11:25 AM