Connections
Optional: Connecting Digital AV
Receiver
AUDIO
IN
DIGITAL
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2
Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
3
Set the DVD player's Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 29
"Digital Output").
Helpful Hint:
–
If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
12
01-43_DVP3026_94_eng_RC2
AV Receiver
12
30/06/06, 4:54 PM