Installation - Wolf TYG48 Installation & Operation Manual

INSTALLATION, OPERATION AND CARE OF
Teppan-Yaki Griddles are produced with quality workmanship and materials. Proper
installation, usage and maintenance of your griddle will re sult in many years of
satisfactory performance.
Thoroughly read this entire manual and carefully follow all of the instructions provided
Model
TYG48C / TYG60C
Before installing, verify that the type of gas supply (natural gas or propane) agree with
the specifications on the rating plate riveted behind the chassis panel on the right side of
the unit. If the supply and equipment requirements do not agree, do not proceed with the
installation. Contact your dealer immediately. It is recommended that a trained gas
service technician with the necessary tools, instruments , skills and experience with this
type of restaurant operation perform the installation of the griddle.
UNPACKING
This griddle was inspected before leaving the factory. The carrier assumes full responsibility for the
safe delivery upon acceptance of the shipment. Check for possible shipping damage immediately after
receipt.
If the griddle is found to be damaged, complete the following steps:
1. Carrier must be notified within 5 business days of receipt.
Carrier's local terminal must be notified immediately upon discovery (note time, date, and
2.
who was spoken to), and follow up and confirm with written or electronic communication.
3. All original packing materials must be kept for inspection purposes.
4. The griddle cannot have been moved, installed, or modified.
5. Notify Vulcan Customer Service immediately at 800-814-2028.
Carefully unpack your griddle and make sure that no parts are discarded with packaging
material. A pressure regulator designed to operate with the griddle has been supplied and
must be installed before the griddle is placed into service (Refer to GAS PRESSURE
REGULATOR INSTALLATION in this manual).
LOCATION
Do not permit air to blow directly at the griddle. Avoid open windows next to t he griddle
wherever possible. Avoid wall-type fans which create air cross-currents within the room.
This griddle is Design Certified for installation on a non -combustible counter with 4" legs,
or combustible floor with 20" high stand.
HEAVY DUTY GAS GRIDDLES
GENERAL
Number of Burners

INSTALLATION

1
- -
3
BTU/hr Input Rating
30,000