Optional: Connecting Digital Av Receiver; Receiver Has A Pcm, Dolby Digital, Or Mpeg2 Decoder - Philips DVP3000K/93 User Manual

Connections
Optional: Connecting Digital AV
Receiver
AV Receiver
CENTER
AUDIO
OUT
SUB-
WOOFER REAR FRONT
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2
Connect the COAXIAL jack of the DVD
Player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
3
Set the DVD Player's Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 29
"Digital Output").
Helpful Hint:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
12
01-41 DVP3000K_93_RC2
AUDIO
IN
DIGITAL
DIGITAL
OUT
VIDEO
OUT
CVBS
12 26/09/05, 9:53 AM