Table of Contents
Advertisement
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
48kHz: Playback a disc recorded at the
sampling rate of 48kHz.
96kHz: Playback a disc recorded at the
sampling rate of 96kHz that can only be
achieved in Stereo-Classic (Flat) mode.
Helpful Hint:
–
LPCM Output can be selected only when
PCM Only is activated.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
01-39 DVP3000K_13 (Korea)
DVD Setup Menu Options
Sound Mode
The options included in Sound Mode
Setup are: '3D', 'Movie Mode' and 'Music
Mode'.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {SOUND MODE}, then press 2.
2
Press the 3 4 keys to highlight an option.
3
Enter its submenu by pressing 2.
4
Press 3 4 to select a setting, then press
OK to confirm your selection.
3D
This function provides a virtual surround
sound experience using just two speakers.
Off, Living Room, Hall, Arena and
Church
Movie Mode
Select a Sound Mode that matches the
type of music you are playing. These
preset Sound Modes adjust the frequency
bands of the video to enhance your
favourite movie sound track.
Off, Sci-Fic, Action, Drama and
Concert
Music Mode
Select a Sound Mode that matches the
type of music you are playing. These
preset Sound Modes adjust the frequency
bands of the audio to enhance your
favourite music.
Off, Digital, Rock, Classic and Jazz
SYSTEM MENU
27
.
25/01/2005, 5:08 PM
27
Advertisement
Table of Contents
