Turn On Progressive Scan; Play; Play A Disc; Play Video - Philips DVP2320BU User Manual

Turn on progressive scan

Note
•
To use the progressive scan feature, you must connect
a progressive scan TV with the component video jacks
(see "Connect" > "Connect video cables" > "Option 2:
Connect to the component video jacks" for details).
Video Steup
TV System
TV Display
Progressive
Picture Setting
1
Turn on the TV to the correct viewing channel
for this product.
2
Press SETUP.
3
Press to select [Video Setup].
4
Select [Progressive] > [On], then press OK.
»
A warning message is displayed.
5
To proceed, select [Ok] and press OK.
»
The progressive setup is complete.
Note
•
If a blank/distorted screen is displayed, wait for 15
seconds for the auto recovery.
•
If no picture is displayed, turn off the progressive scan
mode as follows:
•
1) Press to open the disc compartment.
•
2) Press the Numeric button '1'.
6
Press SETUP to exit the menu.
7
You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
•
During play, when the progressive scan mode is on for
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.
On
Off

5 Play

Play a disc

Caution
•
Do not place any objects other than discs into the disc
compartment.
•
Do not touch the disc optical lens inside the disc
compartment.
1
Press PUSH TO OPEN to open the disc
compartment.
2
Load a disc with its label facing up.
3
Close the disc compartment and start disc
play.
• To view disc play, turn on the TV to the
correct viewing channel for this product.
• To stop disc play, press
Note
•
Check the types of discs supported (see "Specifications"
> "Play media").
•
If the password entry menu is displayed, enter the
password before you can play the locked or restricted
disc (see "Adjust settings" > "Preferences" > [Parental]).
•
If you pause or stop a disc, the screen saver appears after
5 minutes of inactivity. To deactivate the screen saver,
press DISC MENU.
•
After you pause or stop a disc and no button is pressed
within 15 minutes, this product automatically switches
to standby.

Play video

Note
•
Some operations may not work with some discs. See the
information accompanying the disc for details.
Control video play
1
Play a title.
2
Use the remote control to control the play.
Button Action
Start, pause or resume disc play.
Stop disc play.
Skip to a previous/next title or
,
chapter.
.
EN 9