Contents Important Safety and important notice Trademark notice Your product Feature highlights Product overview Connect Connect video cables Connect audio cables Route audio to other devices Connect USB flash drive Connect power Get started Prepare the remote control Find the correct viewing channel Select menu display language Turn on progressive scan Play...
1 Important Safety and important notice Warning • Risk of overheating! Never install the product in a confined space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. •...
2 Your product Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome. Feature highlights Screen Fit View the movie in full screen display on any TV.
Start, pause or resume disc play. • Skip to the previous or next title, chapter, or track. • Mute volume (applicable only to certain Philips brand TVs). i Numeric buttons • Select an item to play. j SUBTITLE • Select a subtitle language on a disc.
Option 1: Connect to the AV OUT jack Connect the supplied AV cables to: • AV OUT jack (3.5mm) on this product. • the video input jack on the TV. VIDEO IN • The video input jack on the TV may be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
Connect the supplied AV cables to: • AV OUT jack (3.5mm) on this product. • the audio input jacks on the device. Connect USB flash drive Connect a USB flash drive to the this product. Note • This product can only play/view MP3, WMA, DivX or JPEG files that are stored on a USB flash drive.
Turn on progressive scan Note • To use the progressive scan feature, you must connect a progressive scan TV with the component video jacks (see “Connect” > “Connect video cables” > “Option 2: Connect to the component video jacks” for details). Video Steup TV System TV Display...
Page 9
Button Action Search fast-backward or fast- forward. Press repeatedly to change the search speed. Search slow-forward or slow- backward. Press repeatedly to change the search speed. For VCD/SVCD, slow-backward search is not available. AUDIO Select an audio language or channel available on a disc.
Repeat play for a specific section During play, press REPEAT A-B at the start point. Press REPEAT A-B again to set the end point. » Repeat play starts. To cancel repeat play, press REPEAT A-B again. Note • The marked section for repeat play is only possible within a track/title.
Note • It may require longer time to display the disc content on the TV due to the large number of songs/photos compiled onto one disc/USB flash drive. • If the JPEG photo is not recorded with an ‘exif ’ type file, the actual thumbnail picture cannot be shown on the screen.
• You can set or change the password, go to > [Password]. [OSD Language] Select an on-screen menu language. [Sleep Timer] Switch automatically to standby at the preset time. • [Off] - Disable sleep mode. • [15 mins], [30 mins], [45 mins], [60 mins] - Select the count down time for this product to switch to standby.
• [88.2kHz (X2)] - Convert to twice the original sampling rate. • [176.4kHz(X4)] - Convert to four times the original sampling rate. [Night Mode] Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
Page 14
[Audio] Select an audio language for disc play. [Subtitle] Select a subtitle language for disc play. [Disc Menu] Select a disc menu language. Note • If the language you have set is not available on the disc, the disc uses its own default language. •...
Page 15
[Version Info] Display the software version of this product. • This information is required when you want to find out if a newest software version is available at the Philips website that you may download and install on this product. [Default]...
If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back of your product.
Page 17
No audio output from the loudspeakers of the audio device (stereo system/amplifier/receiver). • Ensure that the audio cables are connected to the audio input of the audio device. • Turn on the audio device to its correct audio input source. No sound during DivX video playback •...