Safety - General Slicing MM-5 Operator's Manual

Table of Contents

Advertisement

SAFETY

RECOGNIZE SAFETY INFORMATION. When you see this symbol on
your machine or in this manual, be alert to the potential for personal injury.
Follow the recommended precautions and safe operating practices.
UNDERSTAND SIGNAL WORDS. DANGER, WARNING and CAUTION
appear with the safety-alert symbol in this manual and on safety labels on
the machine to identify the level of hazard seriousness.
DANGER indicates a hazard that WILL result in severe personal injury or
death.
WARNING indicates a hazard or unsafe practice which COULD result in
severe personal injury or death.
CAUTION indicates hazards or unsafe practices which COULD result in
minor personal injury or equipment damage.
READ ALL INSTRUCTIONS
Read this operator's manual before using the machine. Failure to follow
the instructions provided could result in personal injury or equipment
damage.
KEEP OUT OF REACH OF CHILDREN
This mixer is intended for commercial use only.
DO NOT PUT HANDS OR ANY IMPLEMENT IN THE BOWL
WHILE THE MIXER IS OPERATING
DO NOT OPERATE IF DAMAGED
Do not operate this mixer with a damaged cord or plug, or if the mixer has
been dropped or damaged in any manner. Contact the nearest factory-
authorized service center for examination, repair or adjustment. (Refer to
the service center list included in the Owner's Information Packet.)
Do not allow the cord to touch hot surfaces.
Do not allow the cord to hang over the edge of a table or counter.
DO NOT LEAVE MIXER UNATTENDED
UNPLUG MIXER
Set the switch to OFF and unplug the mixer from the outlet when not in
use or when clearing a jammed attachment.
KEEP MACHINE AWAY FROM WATER
Do not let machine base stand in water
Do not immerse the mixer in water or any other liquid.
ATTACHMENTS
Do not use attachments not recommended by the manufacturer.
Follow the manufacturer's instructions for use of attachments
SAVE THESE INSTRUCTIONS.
Keep this booklet in a convenient location for future reference.
2
04 02 96

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MM-5 and is the answer not in the manual?

This manual is also suitable for:

Mm-7

Table of Contents