Specifications - Makita HR2800 Instruction Manual

ENGLISH (Original instructions)
1-1. Switch trigger
2-1. Lamp
3-1. Reversing switch lever
4-1. Quick change chuck for SDS-plus
4-2. Change cover line
4-3. Change cover
5-1. Spindle
5-2. Quick change drill chuck
5-3. Change cover line
5-4. Change cover
6-1. Action mode changing knob
7-1. Action mode changing knob
8-1. Action mode changing knob
9-1. Action mode changing knob

SPECIFICATIONS

Concrete
Capacities
No load speed (min
Blows per minute
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
For Model HR2800
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
For Model HR2810, HR2810T, HR2811F, HR2811FT
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Explanation of general view
10-1. Grip base
10-2. Side grip
10-3. Teeth
10-4. Protrusion
11-1. Bit shank
11-2. Bit grease
12-1. Bit
12-2. Chuck cover
13-1. Bit
13-2. Chuck cover
14-1. Action mode changing knob
15-1. Action mode changing knob
16-1. Depth gauge
17-1. Dust cup
Model
Tungsten-carbide tipped bit
Core bit
Diamond core bit (dry type)
Steel
Wood
-1
)
Overall length
Net weight
Safety class
HR2800/HR2810
314 mm
3.4 kg
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
ENE042-1
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical
according to EN60745:
Model HR2800
ENE043-1
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model HR2810, HR2810T
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
4
19-1. Blow-out bulb
21-1. Chuck adapter
21-2. Keyless drill chuck
22-1. Quick change chuck for SDS-plus
22-2. Change cover line
22-3. Change cover
23-1. Spindle
23-2. Quick change drill chuck
23-3. Change cover line
23-4. Change cover
24-1. Sleeve
24-2. Ring
24-3. Quick change drill chuck
HR2810T HR2811F
28 mm
80 mm
80 mm
13 mm
32 mm
0 - 1,100
0 - 4,500
339 mm 320 mm
3.5 kg 3.5 kg
/II
A-weighted noise level
) : 89 dB(A)
pA
) : 100 dB(A)
WA
) : 89 dB(A)
pA
) : 100 dB(A)
WA
HR2811FT
345 mm
3.6 kg
ENF002-2
ENG905-1
determined