Provisioning Methods - Yealink SIP-T2 SERIES Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
settings.
IP phones can be configured automatically through configuration files stored on a central
provisioning server, manually via web user interface or phone user interface, or by a
combination of the automatic and manual methods. If a central provisioning server is not
available, you can configure most features using manual method.
There may be a configuration priority among the provisioning methods - settings you make
using a higher priority provisioning method override settings made using a lower priority
provisioning method.
The precedence order for configuration parameter changes is as follows (highest to lowest):
The priority mechanism takes effect only if the value of the parameter
Note
"static.auto_provision.custom.protect" is set to 1. For more information on this parameter, refer to
Configuration Parameters
Static settings have no priority. For example, settings associated with auto
provisioning/network/syslog, TR069 settings and internal settings (e.g., the temporary
configurations to be used for program running). For more information, refer to
Settings on page 969.
122
on page 148.
Appendix F: Static