Philips DVDR615 User Manual page 20

Installing the DVD Recorder
Note: Make sure you have successfully
made all the required connections to the
DVD recorder, the TV and Satellite
Receiver/Cable Box (if any) and switched
them on. The automatic channel search
will detect the signals and save all the
available programme channels.
0
Press OK again to start automatic TV
channel search.
➜
The automatic search may take 15
minutes.
!
When TV channel search complete, press
OK to continue.
➜
The { Time and Date } menu appears
on the TV.
"
Check if the information on the menu is
correct.
➜
If required changes, follow steps
of "Setting the time and date" on page 25.
§
Press 4 to select { Done } and press OK
to save the changes.
➜
The first installation is now complete.
➜
The first tuned TV channel appears.
The DVD recorder is ready for use!
TIPS: Press OK to exit the first installation menu.
Press RETURN to go back to previous menu item.
20
1DVDR6xx_Eng05_14134c
(cont'd)
Helpful Hints:
– If the DVD recorder cannot find any TV
stations, select programme number {1} on
the TV set or check the cable connection
from the antenna socket to the DVD
recorder and TV set.
– If the sound or picture is distorted on any
of the stored TV channels, see pages 21~25
"TV channel programming" for manual TV
search or fine-tuning.
4~8
20
3139 246 14134
9/28/04, 11:20 AM