Changing The Default Language; About The Wps Pro Region Setting - DNP WPS PRO User Manual

Changing the Default Language

Changing the Default Language
Use this procedure to change the default language for your WPS Pro device.
Under the General section of the WPS Pro Configuration screen, locate the Language option.
1.
Tap the Language box and select a language from the list.
2.
 EN – English
 FR – French
 ES – Spanish
 PT – Portuguese
N ot e
Not all languages are available in every sales region where the WPS Pro devices are sold. Only the
languages that are available in your sales region are displayed on the WPS Pro Configuration
screen. For more information, please contact your sales representative.
Scroll to the bottom of the page and touch the Save Configuration button.
3.
Upon touching the Save Configuration button, your device restarts.
4.
After three minutes, reconnect to the WPS Pro Wi-Fi network. (If you have initial test prints turned ON, reconnect
5.
once your test image prints.)
Return to the WPS Pro Configuration screen to confirm the change has been made.
6.

About the WPS Pro Region Setting

The region setting displays the region where your WPS Pro device is intended to be used. The sales region cannot be
changed.
DNP Imagingcomm America Corporation
WPS Pro User Guide
81