Philips DVDR3380 User Manual page 54

DVD System Menu Options
CHANNEL SETUP settings (continued)
Modify Channel
Information
Channel
Name P001/Ch003
Scan mode
Frequency
Frequency
55.26MHz
TV System
PAL B/G
NICAM
On
Audio DUAL A
Decoder
Off
Skip
No
Fine-tune
OK Cancel
OK
Sort Channels
Sort Channels
P001 BC020 Skip
P002 SW006 Unskip
P003 CH008 Unskip P003 CH008 Unskip
P004
CH004 Unskip
P005 GG006
Skip
P006 CH010 Unskip
P007 CH012 Unskip
P008 CH005 Unskip
54
{ Audio } – For bilingual TV programmes, you can switch
between stereo (original) and additional audio
language.
– Use
{ DUAL B }, then press OK to confi rm.
{ Decoder } – If you have connected the recorder with an
external decoder, set it to { On } and press
OK to confi rm.
{ Skip } – Select this to set the channel to be skipped.
The skipped channels can only be accessed by
pressing the corresponding number key on
the remote control.
– Use
skip this channel, then press OK to confi rm.
{ Fine-Tune } – Select this to fi ne-tune the TV channel
manually if the reception is poor.
– Use
3) To confi rm all settings, select
Rearrange all stored TV channels.
1) Use keys to highlight {
The list of TV channel programmes appears.
2) Use keys to highlight the channel you want to change and press
OK.
The selected channel will move to the right side of the screen.
3) Use keys to shift the TV channel to the desired position and
press OK again.
The selected channel will be inserted before the current position.
B C
4) Repeat steps ~ until you have sorted all the TV channels you
want.
5) Press RETURN on the remote control to go back to the previous
menu.
(continued)
keys to select { DUAL A } or
keys to choose { Yes } if you wish to
keys to adjust the frequency.
and press OK.
OK
Sort Channels
} and press
OK
.