Table of Contents
Advertisement
� EVA filtration process - how long does it take?
Just as in nature, water is purified by the force of gravity, drop by drop, slowly and
naturally.
Depending on the hardness of your tap water, it usually takes 45 minutes to 1 hour
to filter 1 litre of water.
Only 8 steps to turn tap water into spring water:
Step 1
- Ceramic filter: removes all the harmful and unnecessary substances such
•
as iron rust, sediment and germs thanks to its pore size of 0.2 of a micron.
Step 2
- Activated carbon: removes chlorine, THMs (trialomethane chemicals),
•
organic chemicals, nitrates and sulphates, unpleasant odours and colours.
Step 3
- Silver activated carbon (colloidal silver): removes chlorine, THMs, organic
•
chemicals, unpleasant odours and colours, and kills bacteria and parasites such
as salmonella and Escherichia Coli.
Step 4
- Silica sand: removes acidic components giving the water a better taste.
•
Step 5
– Zeolite is well-known in industrial chemistry as a filtration substrate
•
for dissolved chemical particles: removes heavy metals (lead, chlorine, copper,
aluminium and cadmium) and softens the water.
Step 6
- Mineral sand: assists the function of the activated carbon and maintains
•
the freshness of the water.
Step 7
- Coral stones: release minerals and oxygen, adjust the pH of water
•
to mild alkaline (which helps restore the pH balance of the body's fluids), and
improve the taste of the water.
(Our coral is sustainably sourced from Indonesia and Australia under current
regulations).
Step 8
- Magnetic system: magnetized water has a free-moving hexagonal
•
water structure in harmony with the body's fluids, just like mineral spring water.
It promotes health, vitality and imparts many therapeutic properties. Only the EVA
12L has a magnetic system in its tap. If you want to magnetize your water using
the 7L EVA, we recommend you purchase the BEP model with the infrared mineral
tray and added red clay magnet.
EVA Advanced Water Filtration System can be used with all drinking water: tap, well
or spring water.
8
� Assembly Instructions
EVA Advanced Water Filtration System is easy to install, no tools required.
1.
2. Rinse the Ceramic component
3. Remove wing nut, fix ceramic
4. Hold the cartridge below water in a
5.
6. Rinse the mineral tray under the
7. 1 Internal Seal + 1 External Seal
After it has been put together, carry out at least 2 filtration processes prior to
consuming water. Your EVA System is now ready to use.
DO NOT EXPOSE YOUR WATER FOUNTAIN TO DIRECT SUNLIGHT
Step by Step Instructions:
Wash hands thouroughly to reduce
risk of contaminating filter.
under the tap.
filter in place. Screw wing nut in
from underneath tight, but do not
force it.
bowl or sink until all air bubbles
have dispersed, then screw into the
support.
FIR module (Optional, BEP model)
tap.
(against leaks). Screw in tight.
Do not force. To ensure seals
and tap are correctly installed it
is
recommended
you
test
the
seals by filling the lower tank
section separately with water first.
9
Advertisement
Table of Contents
