Philips DVDQ40/002 Owner's Manual page 18

Zoom
The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.
¶ Select
(ZOOM).
¶ Press 3/4 to activate the ZOOM function and select the
required zoom factor: 1.33 or 2 or 4.
➜ Playback will pause.
➜ The selected zoom factor appears below the Zoom icon
in the menu bar, and 'Press OK to pan' appears below the
menu bar.
➜ The picture will change accordingly.
¶ Press OK to confirm the selection.
➜ The panning icons appear on the screen.
¶ Use the 1 2 3 4 keys to pan across the screen.
¶ When OK is pressed only the zoomed picture will be
shown on the screen.
¶ To exit ZOOM mode:
– Press B to resume playback.
FTS-Video
¶ The FTS-Video function allows you to store your favorite
titles and chapters (DVD) and favorite tracks and indexes
(VCD) for a particular disc in the player memory.
¶ FTS program can contain 20 items (titles, chapters etc.).
¶ A programmed FTS will be placed on top of the list when
playback is activated. When the list is full, a new program
will replace the last program on the list.
¶ The program can be selected and played at any time.
Storing an FTS-Video Program
¶ While playback is stopped, select VIDEO FTS c in the
menu bar.
¶ Press 4 to open the menu.
➜ The VIDEO FTS menu appears.
¶ Press 2 or 1 to select ON or OFF.
Storing titles/tracks
¶ Press 4 to select TITLES.
¶ Use 2 and 1 to select the required title.
¶ Press OK if you wish to store the entire title.
➜ The title number will be added to the list of selections.
O
18
PERATION
Storing chapters/indexes
¶ Press 4 on the selected title number.
➜ The title number will be marked and the highlight moves
to the first available chapter number for this title.
¶ Use 2 and 1 to select the required chapter number.
¶ Press OK to confirm the selection.
➜ The title/chapter selection will be added to the list of
selections.
¶ Press SYSTEM MENU to exit the VIDEO FTS c menu.
Erasing an FTS-Video Program
¶ While playback is stopped, select VIDEO FTS c in the
menu bar.
¶ Use 4 to select PROGRAM.
¶ Use 2 and 1 to select the required number.
¶ Press OK to erase the selection.
¶ Press SYSTEM MENU to exit.
Erasing all selections
¶ While playback is stopped, select VIDEO FTS c in the
menu bar.
¶ Use 4 to select CLEAR ALL.
¶ Press OK.
➜ All selections will be erased.
¶ Press SYSTEM MENU to exit.
Auto Wake-up Timer
The wake-up timer allows your player to turn on after a
preset time.
1
Select in the menu bar.
2
Press 4.
➜ Time edit box will appear.
3
Use the 3 or 4 to select the sleep time. The maximum
time you can select is 600 minutes. Selection is made by 30
minutes steps each time.
4
Press OK to confirm the selection.
5
The Wake-up Timer will activate when the set is switch to
standby-mode.