Panasonic WJ-NX400K Installation Manual page 21

3 Connections
Connection example for emergency recording
When the external switch is turned on, emergency recording will start.
Recording time and recording rate for emergency recording differ according to the settings of "Emergency rec." on the setup
menu. (Refer to the Operating Instructions.)
External switch
Connection example for external recording switching
When the external switch is turned on, the recording program will be switched and recording will start.
The recording program can be set by selecting "Ext." for "Time table" of "Schedule" on the setup menu. (Refer to the Operating
Instructions (PDF) for further information.)
External switch
Connection example 1 for the auto adjustment time function
When "Auto time adjustment" found in "Date & time settings" under "Date/Language" on the setup menu is set to
"Master".
"Time adjustment output" becomes available and the clock of this recorder will be applied to other devices.
The time adjust output signal will be supplied from C5 terminal to other recorders at the time set for "Activation time" of "Time &
date" under "Basic" on the setup menu.
D1
D12
(continued)
(External recording mode switching input)
C5
(Time adjustment I/O)
C11
(Signal ground)
(Emergency recording input) D2
D11
(Signal ground)
D4
D11
(Signal ground)
Terminal of the other device
Front panel
LED monitor
output
C1
C12
C1
C12
21