Philips DVD727 Owner's Manual page 12

12 Hookups (cont'd)
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
1
3
1
Connect an S-Video cable (not supplied) to the S-VIDEO
(VIDEO OUT) jack of the DVD Player and to the TV's
S-VIDEO In jack.
2
Connect the supplied audio cable to the red and white
AUDIO OUT (left and right) jacks on the DVD Player and
to the left/right AUDIO IN jacks on the TV. The supplied
audio cable has red and white markings. Match the cable colors to
the jack colors.
3
Plug the power cords of the DVD Player and the TV into an
active power outlet. Press STANDBY-ON y y on the front of
the DVD Player to turn it on.
4
Turn on the TV. Set it to the correct S-Video In channel. See
your TV owner's manual for details. Or, go to your lowest TV
channel (01 or 02) and change channels downward until you see the
DVD screen on the TV.
Connecting to a TV Only
TV has an S-Video In Jack
Back of TV
(example only)
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
2
Helpful Hints
• On the TV, the S-Video In jack
may be labeled Y/C, S-Video, or
S-VHS (super video).
• If your TV has a single Audio In
jack instead of separate
left/right Audio In jacks, you will
need a different audio cable.
You need a "splitter" audio
cable to go from the left/right
AUDIO OUT jacks of the DVD
Player to the single Audio In
jack on your TV. See your
electronics retailer for details.