Programmed Playback - Philips DVD724 Owner's Manual

30 Programmed Playback

AUDIO CD VIDEO CD
You may play Tracks in an order you specify instead of playing the Tracks in
normal order (1, 2, 3, etc.).The order in which you set the Tracks to play is
a Program. For example, if you want to set up an Audio CD so Track 12 will
play first, put Track 12 in Program position number one (1).
To set up a Program, follow these steps.
1
Press SYSTEM MENU.
2
GENERAL SETUP will be selected. Press OK.
Press 4 to select PROGRAM, then press 2 to select ON.
3
You can select PROGRAM only when an Audio CD or Video CD is
in the DVD Player.
- - GENERAL PAGE - -
DISC LOCK
PROGRAM F
VFD DIM
OSD LANG
SCR SAVER
MAIN PAGE
PROGRAM PLAY ON
4
Press OK. The PROGRAM PLAY PAGE will appear.This is where
you enter the Track numbers in the order in which you want to play
them.The Number 1 space will be selected automatically as your
starting point.
While the Number 1 space is highlighted, press the
Number buttons to enter the Track number you want to
play first.The Track number will appear in the box beside
the number 1.
PROGRAM PLAY PAGE
PLEASE INPUT 001 - - - 029
1 12 5
2 6
3 7
4 8
CLEAR PROG
ENTER PROGRAM
Use the 3, 4, 1, 2 buttons to move to the next Program
5
position, then use the Number buttons on the remote con-
trol to enter your other Tracks. Repeat this process until
you have entered all the Tracks you want into the Program.
If you enter an incorrect Track number in one of the previous
Program positions, press 34 1 2 to select the Program position.
Press any Number button to clear the box. Use the Number but-
tons to reenter the correct Track number you want.
6
When you have entered all the Tracks you want in the
Program, press 4, 1, and/or 2 to select PROG at the bot-
tom of the PROGRAM PLAY PAGE.Then, press OK. This will
store the Tracks in the Program.The Program may start playing auto-
matically. If not, press PLAY 2 to start playing the Program.
ON
9
10
11
12
QUIT
4-5
2-6
Helpful Hints
• You can enter a maximum of
96 Tracks in a Program.To
access the PROGRAM PLAY
PAGES for positions 13-96, press
Previous 4 or Next ¢ .
• To erase all the Tracks from the
Program, press 4 and/or 1 to
select CLEAR at the bottom of
the PROGRAM PLAY PAGE, then
press OK.This clears all the
Program positions.
• To stop entering Tracks in the
Program, press 4 and/or 2 to
select QUIT at the bottom of
the PROGRAM PLAY PAGE, then
press OK.When you play the
Disc,Tracks will play in normal
order (1, 2, 3, etc.).
• The Program will accept a Track
number only if it is available on
the current Disc.
1