Table of Contents
Advertisement
I
On, Off and Volume: Press the button to switch the audio system on or off.
Turn the dial to adjust the volume.
J
Seek down: Press the button to go to the next station down the radio frequency
band or the previous track on a CD.
K
MENU: Press the button to access different audio system features.
L
INFO: Press the button to access radio or CD information.
M
SOUND: Press the button to adjust the sound settings for bass, treble, middle,
balance and fade.
N
MEDIA: Press the button to access the AUX and SYNC features, it will also
cancel the menu or list browsing.
O
RADIO: Press the button to select different radio bands, it will also cancel the
menu or list browsing.
Sound Button
This will allow you to adjust the sound
settings (for example bass, middle and
treble).
1.
Press the SOUND button.
2. Use the up and down arrow buttons to
select the required setting.
3. Use the left and right arrow buttons to
make the necessary adjustment. The
display indicates the level selected.
4. Press the OK button to confirm the
new settings.
Waveband Button
Press the RADIO button to select from the
wavebands available.
You can use the selector to return to radio
reception when you have been listening to
another source.
Alternatively, press the left arrow button
to display the available wavebands. Scroll
to the required waveband and press OK.
Fiesta (CCT) Canada/United States of America, HE8J 19A321 AA enUSA, Edition date: 201607, First Printing
Audio System
Station Tuning Control
Seek Tuning
Select a waveband and briefly press one
of the seek buttons. The unit will stop at
the first station it finds in the direction you
have chosen.
Manual Tuning
1.
Press the MENU button.
2. Select RADIO mode and then Manual.
3. Use the left and right arrow buttons to
tune down or up the waveband in small
increments or press and hold to
increment quickly, until you find a
station you want to listen to.
4. Press OK to continue listening to a
station.
Scan Tuning
Scan allows you to listen to a few seconds
of each station detected.
1.
Press the MENU button.
2. Select RADIO mode and then Scan.
3. Use the seek buttons to scan up or
down the selected waveband.
260
Advertisement
Table of Contents
Troubleshooting
