Removing A Headlamp; Changing A Bulb - 4-Door - Ford FIESTA 2017 Owner's Manual

5. Locate the vertical adjuster on each
headlamp. Using a Phillips #2
screwdriver, turn the adjuster either
clockwise or counterclockwise in order
to adjust the vertical aim of the
headlamp. The horizontal edge of the
brighter light should touch the
horizontal reference line.
6. Close the hood and turn the lamps off.
Horizontal Aim Adjustment
Horizontal aim is not required for this
vehicle and is not adjustable.

REMOVING A HEADLAMP

1. Open the hood. See Opening and
Closing the Hood (page 182).
E146878
2. Remove the screws.
Fiesta (CCT) Canada/United States of America, HE8J 19A321 AA enUSA, Edition date: 201607, First Printing
Maintenance
E102590
3. Disconnect the electrical connector.
4. Remove the headlamp.
Note: When fitting the headlamp, make
sure that you reconnect the electrical
connector correctly.
2
Note: When fitting the headlamp, make
sure that you fully engage the headlamp in
the retaining clips.

CHANGING A BULB - 4-DOOR

Switch the lamps and the ignition off.
Let the bulb cool down before
removing it.
Do not touch the glass of the bulb.
Note: Only fit bulbs of the correct
specification.
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
197
3
WARNINGS
4