Ford FIESTA 2017 Owner's Manual page 233

Hide thumbs Also See for FIESTA 2017:
Table of Contents

Advertisement

WARNING
Only use replacement tires
and wheels that are the same
size, load index, speed rating and
type (such as P-metric versus
LT-metric or all-season versus
all-terrain) as those originally
provided by Ford. The
recommended tire and wheel size
may be found on either the Safety
Compliance Certification Label
(affixed to either the door hinge
pillar, door-latch post, or the door
edge that meets the door-latch
post, next to the driver's seating
position), or the Tire Label which
is located on the B-Pillar or edge
of the driver's door. If this
information is not found on these
labels, then you should contact
your authorized dealer as soon as
possible. Use of any tire or wheel
not recommended by Ford can
affect the safety and performance
of your vehicle, which could result
in an increased risk of loss of
vehicle control, vehicle rollover,
personal injury and death.
WARNINGS
To reduce the risk of serious
injury, when mounting
replacement tires and wheels, you
should not exceed the maximum
pressure indicated on the sidewall
of the tire to set the beads without
additional precautions listed
below. If the beads do not seat at
the maximum pressure indicated,
re-lubricate and try again.
Fiesta (CCT) Canada/United States of America, HE8J 19A321 AA enUSA, Edition date: 201607, First Printing
Wheels and Tires
greater than the maximum
pressure, a Ford dealer or other
tire service professional should do
the mounting.
20 psi (1.38 bar) greater than the
maximum pressure on the tire
sidewall, the following
precautions must be taken to
protect the person mounting the
tire:
1. Make sure that you have the
2. Lubricate the tire bead and
3. Stand at a minimum of 12 ft
4. Use both eye and ear
the person inflating standing at a
minimum of 12 ft (3.66 m) away
from the wheel and tire assembly.
Important: Remember to replace
the wheel valve stems when the
road tires are replaced on your
vehicle
231
WARNINGS
For a mounting pressure
more than 20 psi (1.38 bar)
When inflating the tire for
mounting pressures up to
correct tire and wheel size.
wheel bead seat area again.
(3.66 m) away from the wheel
and tire assembly.
protection.
WARNING
Always inflate steel carcass
tires with a remote air fill with

Advertisement

Table of Contents
loading

Table of Contents