Motorola EP350 Series User Manual page 32

Main 1st Level
Menu Sub-Menu
CHANNEL SQUELCH (**)
(Channel) (Squelch Level)
TIME OUT (Time
Out Timer)
POWER (**)
(Power Level)
PRIME CH (Prime
Channel)
SCAN LIST 1 (*)
(Scan) (Scan List 1)
LIST 2 (*)
(Scan List 2)
(*) Only supported in Full Keypad Models.
(**) Only supported in Limited Keypad Models.
26
English
English
2nd Level
Settings
Sub-Menu
CH-001 ... NORMAL (Normal)
TIGHT (Tight)
CH-099
–
OFF (Off)
010
020
...
590
600
CH-001 ... HIGH (High)
LOW (Low)
CH-099
–
OFF (Off)
001
...
099
01-XXX _ _ _
02-XXX 001
... ...
15-XXX 099
16-XXX
01-XXX _ _ _
02-XXX 001
... ...
15-XXX 099
16-XXX
Remarks
NORMAL squelch level – receive weak signals.
TIGHT squelch level – receive strong signals and
eliminates unwanted noise.
This determines the maximum duration (in seconds) that the radio can
transmit continuously.
Power level – HIGH or LOW.
The channel that you wish to spend most of your time monitoring. The
radio will always switch back to the Prime Channel if it is idle for more
than the preprogrammed hang-time in other channels.
Allows you to set members of Scan List 1. "XXX "denotes the selected
scan list member. "_ _ _" shows that no scan list member is selected.
User can use the button or the
valid channel list and press PTT to set the selection. Or user can directly
enter valid channel number via keypad and press PTT to set the
selection. (*)
Allows you to set members of Scan List 2. "XXX" denotes the selected
scan list member. "_ _ _" shows that no scan list member is selected.
User can also use the button or the
the valid channel list and press PTT to set the selection. Or user can
directly enter valid channel number via keypad and press PTT to set the
selection. (*)
button to scroll the
button to scroll