ASSEMBLING THE MACHINE AND GRASSBAG
You will need a Phillips screwdriver and a 10mm spanner.
Take care when fitting the lower handles because of their proximity to the
cylinder blade. We recommend the use of gloves.
•
Align the two holes on both of the upper handle with those on the
handle extensions, Secure them using the wignuts and screws provided.
Repeat the process with the lower handle.
•
Attach the assembled handle with one lower handle, by locating onto the
pegs within the main body recessed slots on each side of the mower.
Repeat the process with the other lower handle.
To assemble the grassbag:-
•
Insert the two side frames separately into the holes of the clip
on the front piece.
•
Insert the single wire into the holes at the back of the side frame.
•
Slip the fabric bag onto the wire frame and clip snap the plastic
bars around the edge of the frame.
•
Attach the grassbag by means of the hooks on the bag slot into
the sideplate.
Page 5