Connecting To A Tv And A Stereo - Philips DVD700/P02 Owner's Manual

10 Hookups (cont'd)
Set DOLBY DIGITAL and DTS to OFF on the DVD Player. Details are on pages 38-39. If you play a DVD
when the settings are wrong, the sound will be distorted or you may damage the speakers.
Back of TV
(example only)
VIDEO
1
L/MONO
AUDIO
R
in
VIDEO IN
1
Connect the red and white audio cables to the red and white AUDIO OUT jacks on the DVD
Player and to the red and white AUDIO IN jacks on the Stereo, matching the cable colors to the
jack colors.
2
Connect the supplied yellow video cable to the yellow VIDEO OUT jack on the DVD Player and
to the VIDEO IN jack on the TV. (Or, you may connect an optional S-Video cable to the S-VIDEO OUT
jack on the DVD Player and to the S-VIDEO IN jack on the TV.)
3
Plug in the Stereo's power cord. Turn on the Stereo and select the Stereo's Auxiliary IN station.
During Disc playback, you will adjust the volume at your Stereo. See your Stereo owner's manual for details.
4
Plug in the TV's power cord. Turn on the TV and set it to the Video In channel (or S-VIDEO IN
channel), which usually is located near channel 00. During Audio CD playback, you may check the sta-
tus of Audio CDs on your TV screen. During DVD playback, you will watch the program on the TV. See your
TV owner's manual for details.
5
Connect the DVD Player's power cord to a power outlet.
Press the POWER button to turn on the DVD Player. "HELLO" will appear briefly on the DVD
Player's display panel. You should see the DVD logo on the TV screen briefly. If you do not, check your con-
nections and make sure the TV is on the correct channel. If there is no disc in the DVD player, "no DISC" will
appear on the display panel.

Connecting to a TV and a Stereo

DIGITAL AUDIO OUT
PCM / BITSTREAM
OPTICAL COAXIAL S-VIDEO VIDEO
OUT OUT
2
DVD Player
AUDIO OUT
R L
1
AUDIO (RIGHT) IN
AUDIO (LEFT) IN
Back of Stereo
(example only)