Pausing Playback - Philips DVD700/P02 Owner's Manual

20 Pausing Playback

DVD AUDIO CD
Pausing Playback
1
During playback, press the PAUSE/STILL button on the
remote control (or press the PAUSE button on the DVD
Player). Playback will pause and the sound will be muted.
PAUSE
2
Press the PLAY button to resume playback.
PLAY
DVD
Memory On:
Resuming playback from the point
where playback stopped
1
Press the STOP button during playback. Playback will stop,
and STOP will appear at the top right corner of the TV screen. In
a few seconds, MEMO ON (Memory On) will appear in the top
left corner of the TV screen.
STOP
2
Press the PLAY button. Playback will resume from the
point where playback stopped last.
PLAY
MEMO ON
Pausing Playback...
PLAY
1 2 3
4 5 6
7 8 9
0
+10
CLEAR
SETUP MODE DISPLAY
PAUSE/STILL
SKIP SEARCH MODE
AUDIO SUB TITLE
Memory On...
POWER
TITLE MENU
ENTER
2
PLAY
Helpful Hints
• Memory On can be erased by press-
ing the STOP button a second time
while playback is stopped. MEMO
OFF will appear briefly at the top left
corner of the TV screen.
• Memory On is not available with
Audio CDs.
• The DVD player will turn itself off
automatically after being in Pause
mode for 30 minutes. This helps
avoid the possible burning of the still
image into the TV screen.
• To see the on-screen display messages,
such as PLAY, STOP, or PAUSE, set
OSD MESSAGE to ON. Details are on
page 43.
2
1
REPEAT
A-B
ANGLE
OPEN/
CLOSE
RETURN
1
STOP