Inserting/Replacing The Batteries; Connecting The Nano-Usb; Receiver - Silvercrest SFM 4 A1 Operating Instructions Manual

Inserting/replacing the batteries

♦ Open the battery compartment 8 on the underside
of the wireless mouse .
♦ Insert 2 x 1 .5 V AA batteries into the battery com-
partment 8 (observe correct polarity) . First place
one battery in the lower compartment and then the
second battery in the higher compartment . Ensure
that the plastic strip is positioned under the batteries,
this will make future battery exchanges easier .
♦ Close the battery compartment 8 .
CAUTION
► Always use batteries from the same manufacturer
and of the same type . Always replace both batteries
at the same time .
Connecting the nano-USB receiver
♦ Remove any other mouse that is connected to your
computer and then restart the computer .
♦ Remove the nano-USB receiver 0 from the storage
compartment 9 on the bottom of the wireless
mouse .
♦ Connect the nano-USB receiver 0 to a free USB-port
on your computer while it is running .
SFM 4 A1
│ 11 ■
GB