Turning The Unit On And Off - Panasonic FZ-N1 Series Operating Instructions Manual

• The product prevents overcharging of the battery by charging only
when the remaining battery level is less than approximately 95 %
of its full capacity.
• You can also charge the unit by connecting it to the USB port of a
computer or other device using a USB connection cable.
Note
• When removing the USB connection cable, make sure to
remove it while holding the plug. Do not pull by the cable.
• When connecting a USB connection cable, note the shape of
the micro USB plug and the micro USB port. Do not attempt to
connect the USB connection cable upside down.
• Remove any dust or water droplets from plugs before
connecting them. Do not use excessive force when inserting
plugs or insert them at an angle.
Confirming the battery level
The battery level is displayed in the upper-right corner of the screen,
in the status bar.
Fully charged
You can also confirm the specific amount of battery level remaining.
From the home screen, tap

Turning the unit on and off

Turning the unit on and off
Turning the unit on
Press and hold
briefly vibrates.
Turning the unit off
1. Press and hold
2. Select the power off option.
Charging
→ [Settings] → [Battery].
(power button) on the top of the unit until the unit
until the power options dialog is displayed.
Very low
Getting Started 25