Setup Menu; Basic Operation; General Setup Menu; Osd Language - Philips DVD425 Owner's Manual

Setup Menu

Basic Operation

1
Press SYSTEM MENU in the
STOP mode to enter the Setup
Menu.
2
Press the OK key to go to the
next level submenu or confirm your selection.
Press the 1 2 keys to enter the submenu or
3
return to the previous menu.
Press the 34 keys to highlight the desired menu.
4
5
Press SYSTEM MENU to quit the setup menu.
When you quit the setup menu, the settings
will be stored in the player's memory even if the
player is switched to power off.

General Setup menu

Some settings need to be made in this menu.
They are: DISC LOCK, PROGRAM, DISPLAY
DIM, OSD LANGUAGE and SCREEN SAVER.
Follow the steps below:
1
Press the SYSTEM MENU key to enter the setup
menu.
Press the 34 keys to choose the GENERAL
2
SETUP.
3
Press the OK key to confirm selection.

OSD language

This option is to select a language for information
displayed on TV screen.
Press the 34 keys to highlight OSD
1
LANGUAGE in the GENERAL SETUP menu.
Enter its submenu by pressing the 2 key.
2
Move the cursor by pressing the 34 keys to
3
highlight the selected language.
4
Press the OK key to confirm.
Press the 1 key to return to the GENERAL
5
SETUP menu.
18
Program (not for Picture CD/MP3)
To choose PROGRAM, press 34 keys.
1
Press the 2 key to move the cursor to the field of
2
the submenu to choose the item INPUT MENU.
INPUT MENU: Enter the PROGRAM item.
3
Press OK to enter the program page.
Input your favorite track
1
Input valid track number by pressing the
numerical keys.
Press the 1 234 keys to move the cursor to the
2
next selected position.
If the track number is more than ten, press
2™ to open the next page and go on programing,
or press 1 234 to highlight NEXT button, and
then press OK.
3
Repeat this steps to input another track number
until the whole program is completed.
Remove a track
Press the 1 234 keys to move the cursor to the
1
track you want to remove.
2
Press OK or PLAY key to remove this track from
the program menu.
Playback tracks
When programing is completed,
Press the 1 234 keys to move the cursor to the
1
START button.
2
Press OK.
DVD player will playback the selected tracks
under the programed sequence.