Setup Menu; Basic Operation; General Setup Menu; Disc Lock - Philips DVD616K/031 Service Manual

Setup Menu

Basic operations
1
Press SYSTEM MENU in the
STOP mode to enter the Setup
Menu.
2
Press the OK key to open the
next level submenu or confirm your selection.
Press the 1 2 keys to enter the submenu or
3
return to the previous menu.
Press the 34 keys to highlight the preferred
4
menu.
5
Press SYSTEM MENU to quit the setup menu.
When you quit the setup menu, the settings
will be stored in the player's memory even if the
player is switched to power off.

General setup menu

Some settings are needed in this menu. they are:
DISC LOCK, PROGRAM, VFD DIM, OSD
LANGUAGE and SCREEN SAVER.
Follow the steps below:
1
Press the SYSTEM MENU key to enter the
setup menu.
Press the 34 keys to choose the GENERAL
2
SETUP menu.
3
Press the OK key to confirm selection.

Disc lock

When the disc is locked, the player will store its
typical code into the memory
for the future identification. For the next
playback, the DVD player will prompt to enter
the password.
Press the 34 keys to highlight
1
the DISC LOCK item in the
GENERAL SETUP menu.
2
Press the OK key.
Enter the submenu by pressing the 2 key.
3
- LOCK: Lock the disc being played.
- UNLOCK: unlock the disc.
Press the 1 key to return to the GENERAL
4
SETUP menu.
NOTE:
1. When playback a locked disc, the DVD player
will prompt to enter your password or 3308
(default) password.
2. To change the password , refer to the option
PASSWORD in the PREFERENCE menu .
16

Program

To choose the PROGRAM item, press the 34
1
RETURN DISPLAY
TITLE 0
DISC SYSTEM
keys.
MENU MENU
Press the 2 key to move the cursor to the field of
2
OK
the submenu to choose the
item ON.
ON: Enter the PROGRAM item.
3
Press OK to enter the program page.
Input your favorite track
1
Enter a valid track number by pressing the
numerical keys.
Press the 1 234 keys to move the cursor to the
2
next selected position.
3
Repeat the steps above to enter another track
number until the whole program is completed.
Exclude a track
Press the 1 234 keys to move
1
the cursor to track you want to
exclude.
2
Input an invalid track number to
cancel this track.
Cancel all tracks
Press the 1 234 keys to move the cursor to the
1
CLEAR button.
2
Press OK, all tracks will be cancelled.
3
Now you can input your favorite tracks again.
Press ¡1 or 2™ to program more tracks.
Playback tracks
When programing is completed,
Press the 1 234 keys to move the cursor to the
1
PROG button.
2
Press OK.
DVD player will playback the selected
program under the programed sequence.
Stop the program playback
At the PROGRAM page, when programing is
completed,
Press the 1 234 keys to move the cursor to the
1
QUIT button.
2
Press the OK key to quit this menu or
0 Press the STOP key twice to exit.

VFD Dim

This function is used to adjust the brightness of
VFD on the front panel.
Press the 34 keys to highlight VFD DIM in the
1
GENERAL SETUP menu.
2
Press OK.
Enter the submenu by pressing the 2 key.
3
DVD616K IFU for /751
(not available for DVD discs)
3141 016 18911