Environmental Information; Supplied Accessories; Safety Information; Symbols Used In This Manual - Philips DVD 728 Owner's Manual

Introduction
Thank you for purchasing this Philips DVD Player.
This Owner's Manual explains the basic
operation of this DVD Player.

Environmental Information

All unnecessary packaging has been omitted. We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your DVD Player consists of materials which can
be recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.

Supplied accessories

– DVD-Video Player
– Remote control with Batteries
– Owner's Manual
– Audio cable
– SCART cable

Safety Information

Before operating the DVD Player, check that the
operating voltage indicated on the typeplate is
identical with the voltage of your local power
supply. If not, please consult your dealer.
Place the DVD Player on a flat, hard and stable
surface.
There must be sufficient room in front of the
player for the drawer to be opened.
In a cabinet, allow about 2.5cm (1 inch) of free
space all around the player for adequate
ventilation.
Do not expose your player to extremes of
temperature or humidity.
6
01-29 DVD728 Eng
If the DVD Player is brought directly from a cold
to a warm location, or is placed in a very damp
room, moisture may condense on the lens of the
disc unit inside the DVD Player. Should this occur,
the DVD Player would not operate normally.
Leave the power on for about one hour with no
disc in the DVD Player until normal playback is
possible.
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
When the DVD Player is switched to Standby
mode, it is still consuming some power. To
disconnect the system from the power supply
completely, remove the AC power plug from the
wall socket.

Symbols Used in this Manual

The below symbols appear in some headings
and notes with the following meanings:
Helpful Hints!
Some discs limit certain functions
during playback (eg fast forward is not
working at the beginning of certain discs).
This is normal behaviour because the disc
determines the way in which you can
interact with its content.
6
DVD
– Description refers to playback of DVD-video discs
VCD
– Description refers to playback of Video CDs
CD
– Description refers to playback of Audio CDs
SVCD
– Description refers to playback of Super Video CDs
3139 246 12921
18/03/2003, 4:50 PM