Page 1
Counterweight – 3 lbs (1.35 kg) Counterweight shaft Micro USB charging cable Padded carry bag ONLINE RESOURCES ( www.iOptron.com) User’s Manual Optional accessories, such as ball head, tripod, hand controller and camera electrical trigger cables Firmware upgrades (check online for the latest version) Tips for set up and using the product Reviews and feedbacks from other customers Packaging may change from time to time without notice. Camera and tripod not included. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com ...
Page 2
Reattach the mounting block to the SkyGuider Pro mount and tighten the locking screws. Finally, attach the quick release plate of the ball head to the bottom of the DSLR camera and secure it and attach the camera to the ball head. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com ...
Page 3
RA direction by moving the CW position. Return the mount to upward position and lock the RA Locking Ring again. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com ...
Page 4
The misalignment to North Pole is about 40 min (or about 1 degree in southern hemisphere with Sigma Octantis). If you are using the mount without DEC Bracket, you need to remove the Camera Mounting Block and the iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com ...
Page 5
8408 hand dovetail saddle) controller. Visit www.iOptron.com for a full instruction manual and accessories. Contact support@ioptron.com for technical supports. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com ...
Page 6
A. iOptron warrants your telescope, mount, or controller to be free from defects in materials and workmanship for one year. iOptron will repair or replace such product or part which, upon inspection by iOptron, is found to be defective in materials or workmanship. As a condition to the obligation of iOptron to repair or replace such product, the product must be returned to iOptron together with proof-of- purchase satisfactory to iOptron.
Need help?
Do you have a question about the SkyGuide Pro 3550 and is the answer not in the manual?
Questions and answers