Hotpoint Ariston HB 08 EU Operating Instructions Manual page 23

Do not immerse the blender and lids in
water, as the lubrication on the bearings
may be washed away over time.
Lids and motor unit aren't suitable for
dishwasher
2. Wash the containers and whisk in warm soapy
water.
All removable parts can be washed in warm
soapy water and then carefully rinsed and
dried. If necessary, use a nylon-bristle brush to
complete the cup cleaning operation.
3. Wipe the motor unit with a damp cloth.
4. The non-slip base on the bottom of the bowl can
be removed and cleaned. Make sure it is re-
placed correctly before using it again.
5. Dry all detachable parts thoroughly.
TIP
For quick cleaning between processing tasks, fill the
chopper or food processor bowl with water halfway,
assemble the chopper blade into the bowl and the
motor unit onto the lid according to the description in
the operation section and start chopping function for
a few seconds.
SAFEGUARDING THE ENVIRONMENT
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100%
recyclable and is marked with the recycle
symbol (*). The various parts of the
packaging must therefore be disposed of
responsibility and in full compliance with
local authority regulations governing waste disposal.
SCRAPPING OF HOUSEHOLD APPLIANCES
When scrapping the appliance, make it unusable by
cutting off the power cable and removing the doors
and shelves (if present) so that children cannot easily
climb inside and become trapped.
This appliance is manufactured with
recyclable (*) or reusable materials.
Dispose of it in accordance with local
waste disposal regulations.
For further information on the treatment, recovery and
recycling of household electrical appliances, contact
your competent local authority, the collection service
for household waste or the store where you purchase
the appliance.
This appliance is marked in compliance with European
Directive 2012/19/EU, Waste Electrical and Electronic
Equipment (WEEE).
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product.
The symbol (*) on the product or on the
accompanying documentation indicates that
it should not be treated as domestic waste
but must be taken to an appropriate
collection centre for the recycling of electrical
and electronic equipment.
DECLARATION OF CONFORMITY
This appliance has been designed, constructed and
distributed in compliance with the safety requirements
of European Directives:
• 2006/95/EC Low Voltage Directive
• 2004/108/EC Electromagnetic Compatibility
Directive
it en
23