Advertisement
Available languages
Available languages
11.
Connect the water supply hose to the water entry of the machine. (see fig.10)
12.
Connect another end of the supply hose to water source.
13.
Press the gun trigger and turn on the water tap to expel the air inside the machine.
14.
Plug in and turn on the machine.
15.
Turn the nozzle until the water stream is in a shape you want. See pic
2
for reference. If you will use detergent during cleaning, push the nozzle in a
direction as pic
as pic 3 arrow 1 shows. (see fig.11)
16.
After use, turn off the water lap, and then the switch, Finally plug out.
17.
If a nozzle becomes blocked, separate the spray lance form gun handle and
insert this nozzle cleaning pin into the orifice to clear the obstruction. (see fig.12)
The usage of detergent (low-pressure condition)
1.
Power the detergent into build-in soap bottle.
2.
Pull out the gun head to the low-pressure function. (follow Instruction for use
page.20 section 15)
3
arrow 2 shows. While during normal washing, push the nozzle
fig.10
fig.11
fig.12
1
and pic
20
Advertisement
