Advertisement
Available languages
Available languages
5.
Children & pets
-should always be kept at a safe distance from your work. Make your workshop
child-proof. Lock tool away where children can't get access to them. Remove
batteries from cordless tools.
6.
Use the correct power tool
-Don't force, or attempt to use a power tool for apurpose it was not designed
for. Do not use a small tool to do the job of a heavy duty tool.
7.
Wear correct clothing and footwear
-Don't wear loose clothing. Neckties or jewellery or other item which may get
caught in moving parts. Wear non-slip foot wear, cover or tie back long hair.
Use safety footwear if necessary.
8.
Protect your head
-wear safety googles at all times, every day glasses are not sufficient for eye
protection, as lenses are not impact resistant and could shatter, Use an approved
face or dust mask when operation creates dust. Ensure dust extraction equipment is
functioning and correctly used. Hearing protection should be used if the sound
intensity level for the operator could exceed 85 dB(A). Use a head hat where
there is a risk of falling objects or striking your head on low level obstructions.
9.
Protect yourself from vibration
-Hand held power tools may produce. Vibration can cause disease. Gloves to
keep the operator warm and dry and therefore maintain good blood circulation
in the fingers may help. This tool has not been designed for extended or industrial
operation.
10.
Secure work
-Always secure work. Where practical use a clamp or vice, it will allow you to
use both hands to operate your power tool.
11.
Keep your balance
-Don't over reach, keep proper footing at all time to ensure correct balance.
12.
Maintain your power tool
-Keep your power tool in good working order, keep tools sharp and clean
for best and safest performance. Ensure ventilation holes are kept clean and
unrestricled at all time.
13.
Always Disconnect
-Before changing tools, always ensure they are disconnected from the power
source.
14.
Accessories
-The use of any attachment or accessory other than those mentioned in this
manual could result in damage or injury. The use of improper accessories could
be dangerous.
15.
Never stand on your power tool
-Standing on your power tool or its stand could cause serious injury if the tool is
tipped or if the cutting tool is accidentally contacted. Do not store materials
above or near the tool so that it is necessary to stand on the tool or its stand to
reach them.
16.
Switch off before connecting.
-Ensure the power tool is switched off before connecting to the power source.
If the power tool stops unexpectedly turn the power switch to off.
16
Advertisement
