Advertisement
PLCMTR
‐ Commercial Grade Camera System
Please read instructions carefully before installation and use. Installation should be performed by a professional installer.
To ensure your safety, the driver should not watch videos or operate features on the monitor while driving. There are no
serviceable parts in this unit, do not disassemble or try to repair this unit. If unit malfunctions please return to your vendor
or send to a Pyle repair facility. Please observe and obey the local laws and regulations when installing the unit. Upon
Installation, please make sure as to not to interfere with any of the vehicle's safety features, wiring, components, etc. We
are not responsible for any damages, injury, malfunctions or otherwise noted due to faulty or non‐professional installation.
Connection / Installation:
The camera has the ability to connect up to 4 cameras (2 wired and 2 wireless ‐ the wired cameras can be connected via the
included power and wiring harness, having 2 connector jacks featuring 4‐pin styled connectors. If you desire to take
advantage of this optional feature, and connect additional cameras, please be sure to use compatible cameras with threaded
locking 4‐pin connectors.
*Please visit www.pyleaudio.com to learn more about system compatibility and optional compatible parts.
Camera & Monitor feature built‐in transmitters and receivers, the included antennas need to be connected to the camera
and monitor to send & receive the wireless video signals. Wireless signal transmission range up to 300' feet.
This system includes one camera with built‐in 2.4G wireless transmitter. The camera can be used as a reverse camera
(placed in the rear of your vehicle) or normal safety driving camera to display the picture as viewed through the lens (when
placed on the sides or facing the front of your vehicle). If used as a reverse camera, be sure to wire the 'Reverse Trigger
(Green)' cable accordingly.
Users will have also have the ability to flip the camera picture as displayed on the LCD screen display. The button controls on
the monitor panel allow the picture to be flipped horizontally (Left / Right) for backup rearview camera viewing. Not flipping
the picture will out the camera picture to the monitor displays the camera picture as seen through the camera lens. This
type of display output is used for any camera facing the front of your vehicle.
www.pyleaudio.com
Advertisement
