Samsung DVD-P421 Service Manual page 17

Disassembly and Reaasembly
2-4-3 Housing Ass'y Removal
1) Remove Belt Œ.
2) Push the Hook ´ in the direction arrow "A" and lift up Pulley Gear ˇ.
3) Push the Slider Housing ˆ in the direction arrow "B" and lift up the Gear Tray ¨.
4) Lift up the Slider Housing ˆ.
5) Remove the soldering Ø of 2 points (Red, Black).
6) Remove 2 Screws ∏ and lift down the Motor Load Assy ".
7) Push the 3 Hooks ' bottom side in the direction arrow "C" and lift up the Housing PCB ˝.
8) Push the Hooks Ô and remove Deck PCB .
¨ GEAR TRAY
ˇ PULLEY GEAR
ΠBELT
" MOTOR LOAD ASSY
Ø SOLDERING
2-10
∏ 2 SCREWS
´ HOOK
"A"
"C"
"C"
' 3 HOOKS
<Bottom Side>
Fig. 2-10 Housing Ass'y Removal
"B"
"C"
ˆ SLIDER HOUSING
Ô HOOK
˝ HOUSING PCB
Samsung Electronics