Recycling - Philips 10FF2 Series User Manuals

Battery charging
5
For first time use, fully charge your
PhotoFrame (Battery LED will be off when
battery is fully charged). This process may
take up to 3 hours or more. PhotoFrame
starts fully recharging its internal battery
only when the battery level is below
certain value. This is designed to extend
your PhotoFrame battery life by reducing
unnecessary battery charging.
Note:
Only the 7" and 10" PhotoFrame models have
built in battery, the 5" model does not.
Keep the stand clear from cables
6
Make sure the stand of your PhotoFrame
is clear from cables as cables could pull the
stand out of PhotoFrame to the floor.
Temperature and humidity limitations
7
Operating temperature: 0° ~ 45° (Celsius)
/ 32° ~ 113° (Fahrenheit) Humidity: 20% ~
80%
1.3

Recycling

• To minimize harm to the environment, the
batteries supplied with the PhotoFrame do
not contain mercury or nickel cadmium. If
possible, when disposing of batteries, use
recycling means available in your area.
• The PhotoFrame uses materials that can be
recycled. To minimize the amount of waste
in the environment, check your area for
companies that will recover used televisions
for dismantling and collection of reusable
materials, or contact your dealer for recycling
tips.
• Please dispose of the carton and packing
material through the proper waste disposal
management in your area.
4
Important