Using Your Photoframe; View Photos; View Pre-Stored Photos; View Photos From A Memory Card - Philips 10FF2 Series User Manuals

4.

Using your PhotoFrame

4.1 View Photos
4.1.1 View pre-stored photos
Pre-stored photos can be viewed as either a
slideshow or through the photo menu.
In the main menu select photos, select the
1
source as Photo Frame.
Select an album.
2
Navigate through the album and view the
3
images on the right of the screen or press
the play slideshow button.
4.1.2 View photos from a Memory Card
In the main menu select photos, select the
1
source as the type of memory card installed
( SD/MMC, CF, Memory Stick or xD Cards)
Select the Camera Folder to view all photos
2
on the card.
Navigate through the album and view the
3
images on the right of the screen or press
the play slideshow button.
4.1.3 View photos from a USB device
Connect your PhotoFrame to a PC or
1
laptop using the supplied USB cable. The
PhotoFrame will not be available until it has
been disconnected.
Copy images from the PC or laptop to the
2
Album folder of the PhotoFrame.
View photos as pre-stored photos.
3
Using yout PhotoFrame
4.2 Find a Photo
4.2.1 Browse Mode
To enter Browse mode you need to be in
1
Slideshow mode and click once on the
Play/Stop button.
To move through the photos, navigate left
2
and right.
To restart the slideshow Press the Play
3
slideshow stop button.
4.2.2 Slide Show Mode
Slideshow mode is entered once you turn on
the PhotoFrame. Navigate left and right to
move quickly through the photos.
Note 1:
The frequency of the slideshow can be adjusted.
To do so please read "slideshow frequency"
section.
Note 2:
For slideshow creation and management read
the section "Creating and managing slideshow"
Note 3:
Photos are easily editable from slideshow mode
by pressing the OK button. To go directly to
thumbnail mode form read the photo menu
section.
11