3D Pattern Test; Hdmi Arc Function Inspection; Selection Of Country Option - LG 42LN5700 Service Manual

5.4. 3D pattern test

5.4.1. Test equipment
(1) Pattern Generator MSHG-600 or MSPG-6100 (HDMI 1.4
support)
(2) Pattern: HDMI mode (model No. 872, pattern No. 83)
5.4.2. Test method
(1) Input 3D test signal as Fig.1.
(2) Press 'OK" key as a 3D input OSD is shown.
(3) Check pattern as Fig2 without 3D glasses. (3D mode
without 3D glasses)
Fig.2
<OK in 3D mode without 3D glasses>
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
Fig.3
<NG in 3D mode without 3D glasses>

5.5. HDMI ARC Function Inspection

5.5.1. Test equipment
- Optic Receiver Speaker
- MSHG-600 (SW: 1220 ↑)
- HDMI Cable (for 1.4 version)
5.5.2. Test method
(1) Insert the HDMI Cable to the HDMI ARC port from the
master equipment (HDMI1)
(2) Check the sound from the TV Set
(3) Check the Sound from the Speaker or using AV & Optic
TEST program (It's connected to MSHG-600)
* Remark: Inspect in Power Only Mode and check SW version
in a master equipment

5.6. Selection of Country option

Selection of country option is allowed only North American
model (Not allowed Korean model). It is selection of Country
about Rating and Time Zone.
▪ Models: All models which use LJ22E Chassis (See the first
page.)
▪ Press "In-Start" button of Service Remocon, then enter the
"Option" Menu with "PIP CH-" Button
▪ Select one of these three (USA, CANADA, MEXICO) defends
on its market using "Vol. +/-"button.
- 22 -
LGE Internal Use Only