Service Fixture & Tools; When Replacing The Main P.c.b; Service Position - Panasonic HDC-SDX1P Service Manual

7 Service Fixture & Tools
7.1.

When Replacing the Main P.C.B.

After replacing the MAIN P.C.B., be sure to achieve adjustment.
The adjustment instruction is available at "software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN system", together with Maintenance software.
7.2.

Service Position

This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
No. Parts No.
1 VFK2020
2 RFKZ0379
3 VFK1933
4 VFK1870
CAUTION-1. (When servicing FLASH P.C.B.)
1. Be sure to discharge the capacitor on FLASH P.C.B..
Refer to "HOW TO DISCHARGE THE CAPACITOR ON FLASH P.C.B.".
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH P.C.B..
3. DO NOT allow other parts to touch the high voltage circuit on FLASH P.C.B..
Table S1 Extension Cable List
Connection
PP6002(MAIN) - PS7001(FLASH)
PP6003(MAIN) - PS6701(POWER FPC)
PP6004(MAIN) - MONITOR FPC
PP6001(MAIN) - PS6401(SD HOLDER)
17
Form
20PIN 0.5 B to B
40PIN 0.5 B to B
34PIN 0.5 B to B
30PIN 0.5 B to B