INSTALLER
10 UNPACKINg THE PRODUCT
R
7200 Kombi Plus combination cylinders are delivered in a
single package, protected by a triple wall cardboard box and
loaded on a wooden pallet.
The following items are delivered in a plastic bag inside the
packaging:
− Instruction manual
− Spare parts catalogue
− Hydraulic test certificate
− Certificate of warranty and label with bar code
H
DESCRIPTION
A
B
H
11 HANDLINg
Make sure that any lifting equipment is of adequate capacity to
lift and move the combination cylinder.
Remove the brackets (1) to free the combination cylinder from
the pallet.
A
B
7200 Kombi Plus
550
850
850
2188
1
Proceed as follows to remove the combination cylinder from the
pallet.
− Place a platform of about half the height of the pallet
near the combination cylinder. Make sure the platform is
able to support the weight of the combination cylinder
− Remove the brackets (1) then carefully rotate and slide
the combination cylinder off the pallet on to the platform
− Make sure that the combination cylinder is perfectly
stable, and then remove the pallet
− Carefully rotate and slide the combination cylinder off the
platform on to the floor
− Remove the platform and position the combination
mm
cylinder as required.
mm
mm
1
1
15
1
1
INSTALLER
Installer