Zte BLADE A512 User Manual page 49

To connect to a secured network, you first need to get the
security details from the network's administrator.
1. Touch
2. Slide the Wi-Fi switch to the On position.
3. Touch > Add network.
4. Enter the network SSID (name). If necessary, enter security
or other network configuration details.
5. Touch SAVE.
Connect to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to
add your phone to the access points which support WPS.
You can use one of the following methods to connect your phone
to a wireless network using WPS.
Method one: WPS button (Recommended)
1. Touch
2. Slide the Wi-Fi switch to the On position.
3. Touch > Advanced > WPS Push Button.
4. Press the WPS button on the access point and the access
point will recognise your phone and add it to the network.
Method two: PIN number
1. Touch
2. Slide the Wi-Fi switch to the On position.
> > Settings > Wi-Fi.
> > Settings > Wi-Fi.
> > Settings > Wi-Fi.
49