Philips SPC 200NC Instructions For Use Manual page 8

ENGLISH
8
2 Select your language and click on the 'OK' button.
> The following screen appears.
3 Select at least the 'SPC 200NC PC Camera driver' and click on the 'OK' button.
> The following software license agreement appears.
Click on 'Agree' to continue the installation.
> The following screen, including a progress bar, appears.
> The screen below appears when the installation was successful.
4 You now need to reboot your PC first and then connect your PC camera.
Note!
The SPC 200NC PC Camera is 'XP Plug & Play'.
This means if you are running Windows XP and you have installed Service Pack 2 and the latest
Microsoft Windows XP updates you don't need to install the SPC 200NC PC Camera driver.
Simply plug in the camera and you can start using your SPC 200NC PC Camera.