Camera Settings; General Controls - Philips SPC 200NC Instructions For Use Manual

ENGLISH
10

4. Camera settings

The Philips SPC 200NC properties (audio and video) can be changed from within an application,
or independently by clicking the VProperty icon '
bottom right of your screen. Most applications can show a 'live preview' video image on your
monitor. Always use this option to see the effect of changed settings on your screen.

General controls

1
2
1 Flickerless image
The Flickerless option should only be used under flickering light conditions (e.g. fluorescent
or neon lamps) to prevent flickering or strangely coloured video images. If this option is used
under normal lighting conditions the video image may be overexposed.
2 Region
If you are using the Philips SPC 200NC in Europe, select '50 Hz' and if you are using the
Philips SPC 200NC in North America, select '60 Hz'. For Asia this setting is dependent on
the local mains output. E.g. for China, select '50 Hz' and for Taiwan, select '60Hz'.
Please check your local mains output to find the correct 'Region' setting.
' which can be found in the Windows taskbar