Apm Configuration; Network Stack Configuration; Hdd/Ssd Smart Information; Usb Configuration - Asus MAXIMUS IX FORMULA Manual

Table of Contents

Advertisement

RGB LED lighting
This item allows you to turn the RGB LED lighting on or off.
Configuration options: [Off] [On]
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controllers.
Configuration options: [Disabled] [Enabled]
3.6.9

APM Configuration

The items in this menu allow you to set system wake and sleep settings.
ErP Ready [Disabled]
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
3.6.10

Network Stack Configuration

The items in this menu allow you to configure Ipv4 / Ipv6 PXE support.
3.6.11

HDD/SSD SMART Information

The items in this menu display the SMART information of the connected devices.
NVM Express devices do not support SMART information.
3.6.12

USB Configuration

The items in this menu allow you to change the USB-related features.
The Mass Storage Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section 1.1.2 Motherboard layout for the location of the USB ports.
ASUS MAXIMUS IX FORMULA
3-19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Maximus ix heroMaximus ix code

Table of Contents