Ect Migration Example - HP 5920 series Configuration Manual

0011.2200.1101
0011.2200.1201
0011.2200.1301
0011.2200.1501
# Verify that the BCB has created multicast FDB entries for reaching all other SPBM nodes.
<BCB1> display spbm multicast-fdb
Flags: E-Egress T-Transit
System ID
0011.2200.1101
0011.2200.1201
0011.2200.1301

ECT migration example

Network requirements
As shown in
B-VLAN for I-SID 1000 from VLAN 10 to VLAN 20.
Figure 11 Network diagram
XGE1/0/2
VLAN 100
Site 2
0011-2200-1101
0011-2200-1201
0011-2200-1301
0011-2200-1501
MAC address
0306-4000-03e8
0306-4001-03e8
0306-4002-03e8
Figure 1 1, move I-SID 1000 from the original ECT algorithm to ECT algorithm 2. Change the
VLAN 100
Site 1
XGE1/0/1
XGE1/0/1
BCB 1
XGE1/0/2 XGE1/0/3
XGE1/0/1
XGE1/0/3
SPBM network
BEB 2
10
10
10
10
B-VLAN
10
10
10
XGE1/0/2
BEB 1
XGE1/0/3
XGE1/0/1
BCB 2
XGE1/0/2
XGE1/0/3
XGE1/0/1
XGE1/0/3
XGE1/0/2
BEB 3
39
T XGE1/0/1
T XGE1/0/2
T XGE1/0/3
T XGE1/0/1
Flags Port
T XGE1/0/2
XGE1/0/3
T XGE1/0/1
XGE1/0/3
T XGE1/0/1
XGE1/0/2
VLAN 100
Site 3