Call Processing - Agilent Technologies 8920B Programming Reference Manual

Call Processing

:CPRocess|CALLP
:MODE 'MEAS'
'DATA'
:MODE? (Returns quoted string)
T /
HESE COMMANDS SET QUERY THE TYPE OF INFORMATION COLLECTED WHEN AN ANALOG CALL IS
. T D
CONNECTED HE ISPLAY FIELD IS FOUND ON THE CALL CONTROL SCREEN
:RCDDATA1?|RCDD1? (Returns quoted string)
:RCDDATA2?|RCDD2? (Returns quoted string)
:RCDDATA3?|RCDD3? (Returns quoted string)
:RCDDATA4?|RCDD4? (Returns quoted string)
:RCDDATA5?|RCDD5? (Returns quoted string)
:RCDDATA6?|RCDD6? (Returns quoted string)
T
HESE COMMANDS QUERY THE INFORMATION DISPLAYED ON THE RIGHT
CALL CONTROL
THE SCREEN WHEN THE
"ND ". E
ATA ACH COMMAND CORRESPONDS TO A NON
1 .
OF LINE OF CHARACTERS
:ACTive
T
HIS COMMAND TURNS ON THE FORWARD CONTROL CHANNEL OF THE
. I
SIMULATED BASE STATION F A CALL IS IN ANY OTHER CALL
,
PROCESSING STATE SENDING THE
RETURN TO THE ACTIVE STATE
CONTROL .
SCREEN
:REGister
T
HIS COMMAND INITIATES A REGISTRATION ATTEMPT BY THE MOBILE STATION
T S A
EST ET MUST BE IN THE
:PAGE
T
HIS COMMAND INITIATES A PAGE TO THE MOBILE STATION
A
IN THE CTIVE STATE AND THE
CORRECT VALUES ENTERED FOR A PAGE ATTEMPT TO BE SUCCESSFUL
:HANDoff
T
HIS COMMAND INITIATES A HANDOFF TO ANOTHER VOICE CHANNEL
,
SET THE VOICE CHANNEL POWER LEVEL
. T T S
RESPECTIVELY HE EST ET MUST BE IN THE CONNECTED STATE FOR A HANDOFF
.
ATTEMPT TO BE SUCCESSFUL
:RELease
T
HIS COMMAND TERMINATES AN ACTIVE VOICE CHANNEL CONNECTION WITH THE
. T T S
MOBILE STATION HE EST
RELEASE ATTEMPT TO BE SUCCESSFUL
CALL CONTROL .
SCREEN
S:\agilent\8920\Qkref_20-206\BOOK\SECTIONS\callproc.sec
-
HAND PORTION OF
D
ISPLAY FIELD IS SET TO
-
LABELED DATA FIELD CONSISTING
"ACT"
COMMAND WILL FORCE A
. T A
HE CTIVE FIELD IS FOUND ON THE
CTIVE STATE BEFORE ATTEMPTING REGISTRATION
. T T
HE EST
MS I (P N /M )
D FIELDS HONE UM IN MUST HAVE
.
. T
, SAT "CPR:VCH|VMAC|SAT
AND ARE
ET MUST BE IN THE CONNECTED STATE FOR A
. T R
HE ELEASE FIELD IS FOUND ON THE
Call Processing
.
"D "
ATA OR
CALL
. T
HE
.
S
ET MUST BE
HE COMMANDS TO
45