BMW 128i Owner's Manual page 46

3. Position both locking pins of one side at the
openings provided for them.
4. Press the wind deflector into the openings,
arrows 3, overcoming the tension in the
springs, and push the free locking pin in the
same direction, arrow 4.
5. Position the free locking pins at the corre-
sponding openings and let the spring ten-
sion lock the wind deflector in place,
arrow 5.
6. Fold up the top section of the wind deflec-
tor, arrow 6.
With the wind deflector installed: do not
recline the front-seat backrests too far if
the seat is to be slid all the way back, as this
would damage the wind
Removing the wind deflector
Proceed in the reverse order as used for instal-
lation.
44
Online Edition for Part no. 01 40 2 606 818 - © 03/11 BMW AG Online Edition for Part no. 01 40 2 606 818 - © 03/11 BMW AG
deflector.<
Folding
Slide the red release lever towards the middle of
the wind deflector and push the two halves
apart.